Ricoh D127 - Joint Bracket (Joint the Copier and the Upper Ptu)

Paper Tray Unit Heater
SM 2-27 D127/D128
Installation
2.5.4 JOINT BRACKET (JOINT THE COPIER AND THE UPPER PTU)
1. Remove each of the drawers.
2. Insert the joint bracket (Front) [1] into the slot as the arrow shows and fasten (
x 2)
3. Attach the joint bracket (Rear) [2] as shown. (
x 2)
 The red arrow on the picture above shows the convex side of the screw hole. This is the
important clue to attach the bracket correctly.