Ricoh D127 - SP6-XXX (Peripherals)

System Service Mode
SM Appendix 3-95 D127/D128
Appendix:
SP Mode
Tables
SP6-XXX (Peripherals)
6006*
ADF Adjustment ( "DF Image Adjustment" in the "Adjusting Copy Image
Area")
NOTE: Available menus depend on the machine model and its configuration.
001
Side-to-Side Regist
Adjustment Face
[–2.0 to +2.0 / 0.0 / 0.1 mm/step]
002
Side-to-Side [–2.0 to +2.0 / 0.0 / 0.1 mm/step]
003
Leading Edge Duplex Front [–5.0 to +5.0 / 0.0 / 0.1 mm/step]
004
Leading Edge Duplex Rear [–5.0 to +5.0 / 0.0 / 0.1 mm/step]
007
Rear Edge Erase [–5.0 to +5.0 / 0.0 / 0.1 mm/step]
6007 ADF INPUT Check
009
Original Detection [0 to 1 / 0 / 1 STEP/step]
Displays ADF original sensor information. When the sensor detects an
original, this SP’s value becomes “1”.
013
Registration Sensor [0 to 1 / 0 / 1 STEP/step]
Displays ADF registration sensor information. When the sensor detects an
original, this SP’s value becomes “1”.
015
Feed Cover Sensor [0 to 1 / 0 / 1 STEP/step]
Displays ADF sensor information. When the cover opens, this SP’s value
becomes “1”.