Ricoh D127 - Page 352

System Service Mode
D127/D128 3-96 SM Appendix
6008 ADF OUTPUT Check
003
Feed Motor Forward [ON/OFF]
Makes the paper transfer motor rotate to check ADF condition against
operational load.
004
Feed Motor Reverse [ON/OFF]
Makes the paper transfer motor reverse-rotate to check ADF condition
against operational load.
009
Feed Solenoid [ON/OFF]
Makes the paper feed solenoid intermittent-drive to check ADF condition
against operational load.
011
Inverter Solenoid [ON/OFF]
Makes the inverter solenoid intermittent-drive to check ADF condition against
operational load.
6009 ADF Free Run
001
Simplex Mode [0 to 1 / 0 / 1 STEP/step]
Performs an ARDF free run at simplex scanning mode.
Press "ON" to start; press "OFF" to stop.
002
Duplex Mode [0 to 1 / 0 / 1 STEP/step]
Performs an ARDF free run in duplex scanning mode.
Press "ON" to start; press "OFF" to stop.
6017 ADF Adjustment Magnification
001
Magnification [-5 to 5 / 0 / 0.1 %/step]
Adjusts vertical magnification for ADF.