Ricoh D127 - Page 342

System Service Mode
D127/D128 3-86 SM Appendix
5858
Debug Save When CTL -
These SPs select the content of the debugging information to be saved to the
destination selected by SP5857-2.
SP5858-3 stores one SC specified by number. Refer to the chapter "Trouble
Shooting" for a list of SC error codes.
001
Engine SC Error
Turns the save function on/off for SC codes
generated by copier engine errors.
[0 or 1 / 0 / 1/ step]
0: OFF, 1: ON
002
Controller SC Error
Turns the save function on/off for SC codes
generated by GW controller errors.
[0 or 1 / 0 / 1/ step]
0: OFF, 1: ON
003
Any SC Error [0 to 65535 / 0 / 1 /step]
004
Jam
Turns the save function on/off for jam errors.
[0 or 1 / 0 / 1/ step]
0: OFF, 1: ON
5859 Debug Save Key No. CTL -
001
Key 1
These SPs allow you to set up to 10 keys for log
files for functions that use common memory on the
controller board.
[ –9999999 to 9999999 / 0 / – ]
002
Key 2
003
Key 3
004
Key 4
005
Key 5
006
Key 6
007
Key 7
008
Key 8
009
Key 9