Ricoh D127 - Page 397

System Service Mode
SM Appendix 3-141 D127/D128
Appendix:
SP Mode
Tables
9902
Target Temp revise (Temp)
Sets the fusing additional temperature for the temper
ature correction.
(Pattern A)
001 Added Temp: T1 [0 to 50 / 5 / 1 deg/step ]
002 Added Temp: T2 [0 to 50 / 15 / 1 deg/step ]
003 Added Temp: T3 [0 to 50 / 10 / 1 deg/step ]
004 Added Temp: T4 [0 to 50 / 5 / 1 deg/step ]
005 Added Temp: T5 [0 to 50 / 1 / 1 deg/step ]
006 Added Temp: T6 [0 to 50 / 5 / 1 deg/step ]
007 Added Temp: T7 [0 to 50 / 15 / 1 deg/step ]
008 Added Temp: T8 [0 to 50 / 10 / 1 deg/step ]
009 Added Temp: T9 [0 to 50 / 5 / 1 deg/step ]
010 Added Temp: T10 [0 to 50 / 1 / 1 deg/step ]
011 Added Temp: T11 [0 to 50 / 5 / 1 deg/step ]
012 Added Temp: T12 [0 to 50 / 15 / 1 deg/step ]
013 Added Temp: T13 [0 to 50 / 10 / 1 deg/step ]
014 Added Temp: T14 [0 to 50 / 5 / 1 deg/step ]
015 Added Temp: T15 [0 to 50 / 1 / 1 deg/step ]
016 Added Temp: T16 [0 to 50 / 5 / 1 deg/step ]
017 Added Temp: T17 [0 to 50 / 15 / 1 deg/step ]
018 Added Temp: T18 [0 to 50 / 10 / 1 deg/step ]
019 Added Temp: T19 [0 to 50 / 5 / 1 deg/step ]
020 Added Temp: T20 [0 to 50 / 1 / 1 deg/step ]
021 Added Temp: T21 [0 to 50 / 45 / 1 deg/step ]