Ricoh D127 - Page 399

System Service Mode
SM Appendix 3-143 D127/D128
Appendix:
SP Mode
Tables
9903
Target Temp revise (Time)
Sets the fusing additional time for the temperature correction. (Pattern A)
001 Added Time: S1 [0 to 999 / 10 / 1 sec/step ]
002 Added Time: S2 [0 to 999 / 10 / 1 sec/step ]
003 Added Time: S3 [0 to 999 / 15 / 1 sec/step ]
004 Added Time: S4 [0 to 999 / 10 / 1 sec/step ]
005 Added Time: S5 [0 to 999 / 10 / 1 sec/step ]
006 Added Time: S6 [0 to 999 / 15 / 1 sec/step ]
007 Added Time: S7 [0 to 999 / 12 / 1 sec/step ]
008 Added Time: S8 [0 to 999 / 10 / 1 sec/step ]
009 Added Time: S9 [0 to 999 / 15 / 1 sec/step ]
010 Added Time: S10 [0 to 999 / 15 / 1 sec/step ]
011 Added Time: S11 [0 to 999 / 10 / 1 sec/step ]
012 Added Time: S12 [0 to 999 / 15 / 1 sec/step ]
013 Added Time: S13 [0 to 999 / 10 / 1 sec/step ]
014 Added Time: S14 [0 to 999 / 10 / 1 sec/step ]
015 Added Time: S15 [0 to 999 / 15 / 1 sec/step ]
016 Added Time: S16 [0 to 999 / 10 / 1 sec/step ]
017 Added Time: S17 [0 to 999 / 10 / 1 sec/step ]
018 Added Time: S18 [0 to 999 / 15 / 1 sec/step ]
019 Added Time: S19 [0 to 999 / 12 / 1 sec/step ]
020 Added Time: S20 [0 to 999 / 10 / 1 sec/step ]