Bit Switches
D127/D128 5-34 SM Appendix
Printer Switch 0D - Not used (do not change the settings) [SP No. 1-103-014]
Printer Switch 0E [SP No. 1-103-015]
No FUNCTION COMMENTS
0
Paper size selection priority
0: Width
1: Length
0: A paper size that has the same width as
the received data is selected first.
1: A paper size which has enough length to
print all the received lines without reduction
is selected first.
1
Paper size selected for printing A4
width fax data
0: 8.5" x 11" size
1: A4 size
This switch determines which paper size is
selected for printing A4 width fax data, when
the machine has both A4 and 8.5" x 11" size
paper.
2
Page separation
0: Enabled
1: Disabled
1: If all paper sizes in the machine require
page separation to print a received fax
message, the machine does not print the
message (Substitute Reception is used).
After a larger size of paper is set in a
cassette, the machine automatically prints
the fax message.
3-4
Printing the sample image on
reports
Bit 4: 0, Bit 3: 0 = The upper half
only
Bit 4: 0, Bit 3: 1 = 50% reduction in
sub-scan only
Bit 4: 1, Bit 3: 0 = Same size
Bit 4: 1, Bit 3: 1 = Not used
“Same size” means the sample image is
printed at 100%, even if page separation
occurs.
User Parameter Switch 19 (13H) bit 4 must
be set to “0” to enable this switch.
Refer to Detailed Section Descriptions for
more on this feature.
5-6 Not used Do not change the settings.
To Next Page
Loading...
