Ricoh D127 - Page 515

Bit Switches
SM Appendix 5-63 D127/D128
Appendix:
Fax Trouble-
Shooting
Guide
IP Fax Switch 04 [SP No. 1-111-005]
No. FUNCTION COMMENTS
0-3 TCF error threshold
Sets the TCF error threshold level.
[00 to 0F]
The default is "1111" (0F H).
4-7 Not used Do not change these settings.
IP Fax Switch 05 [SP No. 1-111-006]
No. FUNCTION COMMENTS
0-3
Modem bit rate setting for transmission
Sets the modem bit rate for transmission. The default is "0110" (14.4K bps).
Bit 4 Bit 3 Bit 2 Bit 1
0 0 0 1 2400 bps
0 0 1 1 4800 bps
0 0 1 1 7200 bps
0 1 0 0 9600 bps
0 1 0 1 12.0 Kbps
0 1 1 0 14.4 Kbps
0 1 1 1 Not Used
1 0 0 0 Not Used
1 0 0 1 Not Used
1 0 1 0 Not Used
1 0 1 1 Not Used
1 1 0 0 Not Used
1 1 0 1 Not Used
1 1 1 0 Not Used