Troubleshooting
64
5
If Sheet Paper is Jammed at the Paper Exit
CAUTION:
A
Squeeze the locks on each side of the copier and lift the moddle unit be-
tween the original table and the bypass table.
B
Open the fusing unit cover.
C
Slowly pull the paper out. If there are scraps left inside, open the inner cov-
er, wait for the copier to cool, and remove the scraps.
• The fusing unit can be very hot. Do not touch any parts under the
fusing cover. If necessary, wait until the fusing unit has cooled
down.
To Next Page
Loading...
