12. Turn the wheel on the right side
to bring the paper further in.
13. Lower the top unit of the roll
feeder.
a) Hold the two handles.
b) Squeeze and hold the lock on the left.
c) Lower the unit just a bit.
d) Hold on to the unit, but let go of the lock.
e) Lower the unit until it locks in place.
14. Spin the paper roll a bit to tighten
the paper.
15. Slide the blade from side to side
and gently pull the paper out of
the copier.
16. Close the roll feeder covers.
MAINTAINING YOUR COPIER Loading A Roll Of Paper
26
To Next Page
Loading...
