Ricoh GR III - Transferring Images

4
Playback Functions
99
Transferring Images
Select images to transfer to a communication device and set the transfer
reservation. When the camera is connected to a communication device via
wireless LAN, the file transfer automatically starts.
1 Select [File Transfer] in the C1 menu or on the playback
functions setting screen.
2 Select [Transfer 1 image].
Use cd to select an image.
For images taken with [File Format] set to
[RAW+JPEG], you can select file formats to
transfer.
3 Press e.
The transfer reservation is set for the image.
To transfer another image, repeat Steps 2
and 3.
Memo ---------------------------------------------------------------------------------------------------------
• To cancel the transfer reservation, set [File Transfer] again.
• Refer to “Using the Camera with a Communication Device” (p.111) for how to connect the camera
and a communication device.
1 100 /
100-0001
10:00
OK
Transfer 1 image
CancelCancel
07/07/2021
F5.6 6400
10:00
100-0001
1/2000 EV 0.0
1 100 / 07/07/2021
Downloaded from ManualsNet.com search engine