Ricoh GR III - Using the Saved User Mode

6
Changing the Settings
120
Using the Saved User Mode
1 Set the mode dial to P, Q, or R in the shooting mode.
The user mode guide appears on the shoot-
ing screen.
2 Change the setting as necessary.
To change the exposure mode, set [Exposure
Mode] in the A2 menu.
Memo ---------------------------------------------------------------------------------------------------------
• The setting changed in Step 2 is not saved in the camera. If the mode dial is turned, the setting is reset
to the saved setting. To change the saved setting, save a setting in [Save Settings] again.
• If the Box settings assigned to the mode dial are changed, the settings applied to the mode dial are
also changed.
100
F5.6 400 1/400
USERMODE_NAME_XXXXXX
AF+AE Lock
ISO Setting
Drive Mode
Still/Movie
Program AE
Shutter Priority AE
Aperture Priority AE
Manual Exposure
Exposure Mode
CancelCancel OKOK
Downloaded from ManualsNet.com search engine