7
Appendix
141
Troubleshooting
Power Supply
Problem Cause Solution Page
The camera does not 
turn on.
The battery is not inserted. Charge the battery and correctly 
insert it into the camera.
p.38
The battery is exhausted.
The battery is not inserted in the 
correct orientation.
The battery is incompatible. Use the battery DB-110 exclusively 
developed for this camera.
—
The AC adapter is not correctly 
connected.
Connect the AC adapter correctly. —
The camera turns off 
during use.
The [Auto Power Off] function 
has been activated because the 
camera was not operated for a 
certain period of time.
Turn the camera back on. p.40
The battery is exhausted. Charge the battery. p.38
The camera does not 
turn off.
The camera is malfunctioning. Take the battery out and insert 
it again.
p.37
The low battery indica-
tor is displayed or the 
camera turns off even 
when a fully charged 
battery is installed.
The battery is incompatible. Use the battery DB-110 exclusively 
developed for this camera.
—
The battery cannot be 
charged.
The battery has failed. Replace the battery with a new one. —
The battery is hot. Let the battery cool down to room 
temperature.
—
The battery is quickly 
exhausted.
Ambient temperature is very 
high or very low.
— —
Downloaded from ManualsNet.com search engine