Ricoh GR III - Setting the Copyright Information

6
Changing the Settings
138
Setting the Copyright Information
You can set the copyright information embedded in the Exif data.
1 Select [Copyright Information] in the E1 menu, and press d.
The [Copyright Information] screen appears.
2 Select [On] or [Off] in [Embed
Copyright Data], and press e.
3 Press d in [Copyright Holder].
The text-entry screen appears.
4 Enter the copyright holder.
Up to 32 single-byte alphanumeric charac-
ters and symbols can be entered.
The following operations are available.
abcd Moves the text selection cursor.
r/p Moves the text selection cursor up and down.
n Moves the text selection cursor to the right and left.
e Enters a character selected with the text selection cursor.
You can use the touch panel for the operations.
5 After entering the text, move the text selection cursor to 1,
and press e.
The confirmation screen appears.
6 After checking the setting, press e.
The [Copyright Information] screen reappears.
Memo ---------------------------------------------------------------------------------------------------------
• You can check the Exif information in [Detailed Info. Display] (p.21) in the playback mode.
XXXXXXXXXXXXXXX
Copyright Information
Embed Copyright Dat
aO

Copyright Holder
㹵 e r t y u i o pq
s d f g h j k la
z
123
x c v b n m
Cancel OK
Downloaded from ManualsNet.com search engine