7
Appendix
143
Problem Cause Solution Page
The flash does not
illuminate the subject.
The subject is dark. Adjust the flash output. p.66
Flash output is not appropriate.
Images are too bright. Flash output is not appropriate. Adjust the flash output, move away
from the subject, or use a different
light source.
p.66
The monitor brightness is not
appropriate.
Adjust the brightness of the monitor
in the E3 menu.
p.128
Images are too dark. The monitor brightness is not
appropriate.
Adjust the brightness of the monitor
in the E3 menu.
p.128
The exposure compensation is
set to a negative value.
Change the exposure compensa-
tion value.
p.53
The colors of images
are unnatural.
The camera is unable to adjust
white balance for shooting con-
ditions using auto white balance.
Include a white object with the
subject or select the settings other
than [Auto White Balance] for [White
Balance].
p.69
The monitor brightness
changes during
autofocus.
Ambient lighting is poor or dif-
fers from that used for autofocus.
This is normal and does not indicate
a malfunction.
—
Electronic level indica-
tors are not displayed.
Electronic level indicators are
hidden.
Check the [Shooting Info. Display]
setting in the D3 menu.
p.126
The image is not level
although level indicator
showed that the
camera was level.
The camera was moving during
shooting because you were on
a moving object or due to other
causes.
Do not move the camera during
shooting.
—
The subject is not level. Check the subject. —
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
