The machine has been reset to
the default state after the
specified period of time has
passed with the machine
unoperated. If you were
performing and paused an
operation, perform the operation
from the beginning again.
[Auto Reset Sound] sounds only
when simplified screen is
displayed in the classic mode
applications.
Five long beeps
(repeating four times)
Caution
Copy: Forgot Original
Scanner: Forgot Original
Fax: Forgot Original
Check that an original is not left
on the exposure glass and that
paper is loaded in the paper tray.
Five short beeps
(repeating five times)
Check the message displayed on
the screen, and resolve the
problem by removing the
jammed paper or original, or
replacing the toner.
Check that the original is placed
in the ADF with the side to scan
facing up.
*1 The factory default sound pattern is used as an example in the table above.
• You cannot pause an alert sound that has started. The machine continues to emit
the sound until the preset sound pattern is completed.
• You can specify the volume and type of alert sound in [Settings] [System
Settings] [Sound]. The type of sound can be specified for each condition
described in the table above. You can also specify the volume of the sound emitted
when using On-hook or Immediate Transmission to send a fax in [Settings]
[System Settings] [Sound] [Adjust Sound Volume (Fax)] or [Settings] [Fax
Settings] [Others] [Adjust Sound Volume]. Press [Home] ( ) after specifying
the settings.
See "Setting the Sound Volume and Type", User Guide (HTML).
To Next Page
Loading...
