Ricoh J006 - Displaying the Printer Status

OPERATION PANEL FUNCTIONS
J001/J003 5-2 SM
5.1.2 TO SELECT USB 1.1
You cannot use USB 2.0 in this mode.
1. Press the [Power] key to switch the printer off, then press these keys*
+ +
+
+ +
+
+ +
5.1.3 TO SELECT USB AUTO SELECT MODE
You can use either USB 1.1 or USB 2.0 in this mode.
1. Press the [Power] key to switch the printer off, then press these keys:
+ +
+
+ +
+
+ +
5.1.4 TO FEED 3 CLEAN SHEETS
This removes condensation from the transport belt.
1. Press the [Power] key to switch the printer off, then press these keys:
+ +
+
2. Press this key sequence 5 times:
+
+ +
5.1.5 TO PREPARE THE PRINTER FOR TRANSPORT
1. + + . Then release when the ink LEDs light.
2. Press
8 times. Then wait for the [Power] key to go off.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA