Removals
J007/J010/J011 3-2 SM
7 Horizontal Motor R
8 Vertical Motor R
9 Vertical Encoder Sensor R
10 Vertical Encoder Wheel R
11 Cooling Fan R
12 Duplex Unit Detection Board R
13 Carriage Position Sensor R
14 Air Release Solenoid R
15 2nd Registration Sensor R
16 Friction Pad R
17 Feed Roller C
18 Transport Belt C
Level 3: Technician can repair, special tool required
1 Main Control Board R (with ROM replacement)
2 Carriage Unit C (use cleaning liquid)
Level 4: Cannot repair, requires precision adjustment at factory
1 Carriage Unit ---
2 Ink Supply Pump Unit ---
3 Transport Belt ---
4 Charge Roller ---
5 Temperature/Humidity Sensor ---
6 Paper End Sensor ---
7 Paper Feed Roller ---
3.1.2 BEFORE YOU BEGIN
The covers of this printer are interlocked with plastic tabs and slots. These tabs
and slots are very fragile.
To avoid breaking the cover connection points, remove the covers in the order
described below.
To Next Page
Loading...
