Ricoh J006 - Vertical Motor

Component Removal
J007/J010/J011 3-24 SM
3. At the rear corner of the printer, remove the horizontal motor (
x1).
Reassembly
1. First, reattach the horizontal encoder strip on the right side with its notched
corner down as shown above.
2. Attach the left end of the horizontal encoder strip to the left
3.4.7 VERTICAL MOTOR
1. Release harness [1] (
x1)
2. Remove spring [2] (
x1)
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA