PRINTER DISPLAY SUMMARY
SM 4-3 J001/J003
Trouble-
shooting
4.1.2 STATUS MONITOR MESSAGES
NOTE: The exact wording of the messages (that show on the computer screen) in
the table below may change without prior notice.
Status Display
Status
Message Display
Ready. Normal
You can print.
Ready. Printing
Printing ...
Ready. Drying
Please wait.
Time has been set to allow OHP transparency to dry.
Preparing and Adjusting... Preparing (Warming Up)
Please wait.
Temperature is above the range allowed for printing.
Set up and use the printer in a location that meets
specifications for the allowed temperature and humidity.
Preparing and Adjusting...
Overheated at Power On
(Recoverable)
Please wait.
Temperature is above the range allowed for printing.
Set up and use the printer in a location that meets
specifications for the allowed temperature and humidity.
Supplying ink ... Supplying Ink
Please wait.
Cleaning or refreshing print heads ... Servicing Print Heads
Please wait.
Ready. Resetting Job
Print job is resetting ...
Cannot send print job data. Power Off
Printer does not answer.
Make sure the printer is turned on. Check the power cable
connection.
Ready. Ink Supply Low (K)
Black Print cartridge is empty. Open the cover and replace the
black Print cartridge.
Right, front cover: Black
If you intend to replace more than one cartridge, remove the
empty cartridges and replace them with new ones.
To Next Page
Loading...
