Installation Procedure
J007/J010/J011 1-14 SM
9. Push the tray slowly into the printer until it stops.
10. Lower the output tray.
1.3.6 CONNECT THE POWER CORD
Always connect the printer to a correct power source.
Do not share the printer power source with another electrical device or appliance.
Connect the power cord directly into the power source. Never use an extension
cord.
Never attempt to modify the power cord in any way.
Never put heavy objects on the power cord.
Make sure that the area around the power source is free of unwanted obstacles
so you can disconnect the power cord quickly in case of an emergency.
Make sure the power cord is not coiled or wrapped around any object such as a
table or desk leg.
Never coil the power cord around itself to make it shorter. This can cause the cord
to overheat and cause a fire.
To Next Page
Loading...
