Ricoh J006 - Paper Tray (Tray 1) and Output Tray

To Next Page

To Previous Page

J007/J010/J011 36 Call Center Manual

Paper Tray (Tray 1) and Output Tray

 First, always switch the printer off and disconnect the power cord from the power

source. Then disconnect all other cables (USB, etc.)

1. Pull the paper tray [1] straight out of the printer.

2. Press in both arms [2] and [3] of the output tray to release them then pull the

output tray out of the printer.

CÓPIA NÃO CONTROLADA

Other manuals for Ricoh J006