Ricoh J006 - Air Release Solenoid; Carriage Position Sensor

To Next Page

To Previous Page

Component Removal

SM 3-29 J007/J010/J011

J007/J010/

J011

1. Remove screws [1], [2] ( x2).

2. Disconnect the PCB (

x1)

3.4.12 CARRIAGE POSITION SENSOR

1. Remove the sensor from the top of the air release solenoid bracket ( x3)

2. Disconnect the sensor (

x1).

3.4.13 AIR RELEASE SOLENOID

1. Remove the bracket screws [1], [2] (

x2).

2. Remove the solenoid screws [3], [4] (

x2).

CÓPIA NÃO CONTROLADA

Other manuals for Ricoh J006