Ink Supply System
SM 6-19 J007/J010/J011
J007/J010/
J011
The components and operation of the print heads in the J011 are identical to those of the
J007/J010 described above. However, two additional print head units are provided on the
J007/J010.
The outer print heads unit both supply Yellow and Magenta ink.
During bi-directional printing:
On the left-to-right pass, the print heads on the far right lay down yellow ink over
magenta.
On the right-to-left pass, the print heads on the far left once again lay down yellow ink
over magenta.
This arrangement ensures that yellow ink is always laid down over magenta ink during bi-
directional printing.
The order of application of the other inks (cyan and black) is not important.
Another important difference is that there are three ink pump motors in the J011 (not two
as in the J007/J010).
6.4.6 PRINT HEAD MAINTENANCE
Overview
1 Flushing Gate
2 Maintenance Unit
3 Ink Collection Tank
Rev. 11/2008
To Next Page
Loading...
