Ricoh J006 - Page 191

SPECIFICATIONS
SM 7-1 J001/J003
Specifications
SPECIFICATIONS
1. PRINTER ENGINE BASE SPECIFICATIONS
Configuration
Desktop
Printing Method
On-Demand Ink Printing Technology
Paper Transport
Belt System
Delivery
Face-up
Ink Supply Method
Zero Waste Dual Tank Method
Ink (Y, M, C, K)
Viscous Ink (High Viscosity, Fast Drying, Pigment Ink)
Print Heads
J001 J003
Number of Heads
2 Heads (4-Color) 4 Heads (4-Color)
Lines/Head
2 Lines/Head 2 Lines/Head
Number of
Nozzles
192 Nozzles/Line 192 Nozzles/Line
Nozzle Pitch
0.169 mm (150 dpi) 0.169 mm (150 dpi)
Resolution
Range: 150 to 1200 dpi
Paper Mode (Driver) Resolution
Bi-Directional
(Yes/No)
Defaults
Normal High Speed (Draft) 300 x 300 Yes/1 Pass
Std. (Speed Priority) 300 x 300 See "Note"
Std. (Quality Priority) 600 x 600 Yes/1 Pass
High Quality 600 x 600 No/2 Passes
Special Std. (Quality Priority) 600 x 600 No/2 Passes
High Quality 600 x 600 No/4 Passes
Semi-gloss High Quality 1200 x 1200 No/4 Passes
OHP High Quality 600 x 600 No/4 Passes
User Settings
Normal High Speed (Draft) 150 x 150 Yes/1 Pass
Special High Speed (Draft) 600 x 600 Yes/1 Pass
Semi-gloss High Speed (Draft) 600 x 600 Yes/1 Pass
Std. (Quality Priority) 600 x 600 No/4 Passes
OHP High Speed (Draft) 600 x 600 Yes/1 Pass
Std. (Quality Priority) 600 x 600 No/2 Passes
Note:
J001 Yes/1 Pass
J003 1st Color: Yes/1 Pass, Other Colors: No/1 Pass
Warm-up Time
Less than 30 sec. after power on
First Print Time
J001: Less than 10 sec.
J003 Less than 9 sec.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA