Component Removal
SM 3-17 J007/J010/J011
J007/J010/
J011
Right cover
Top cover
2. Use a plus (+) screwdriver to turn the screw [A] counter-clockwise until the tip
of the triangle [B] is aligned with the tip of the triangle [C].
This unlocks the carriage.
3. Push the envelope selector to the rear.
Pushing the envelope selector to the rear raises the print heads.
This prevents damage to the print heads when the carriage is moved
manually.
Always push the envelope selector to the rear before moving the carriage
manually.
To Next Page
Loading...
