INSTALLATION PROCEDURE
SM 1-19 J001/J003
Installation
8. Pinch the tabs of the bottom fence [A]. Then move it to the edge of the stack.
9. Make sure the top of the stack is perfectly flat. Do this if the top of the stack
bends upward:
• Adjust the positions of the side fences and bottom fence.
10. Reattach the paper tray cover [B].
11. Slowly insert the paper tray [C] into the printer.
12. Make sure that the paper tray is correctly inserted.
G707I928.BMP
G707I929.BMP
G707I930.BMP
[A]
[B]
[C]
To Next Page
Loading...
