6. Preparing a Machine for Transport
Repair Center Manual 59 J007/J010/J011
J007/J010/
J011 Repair
Center
Manual
6. Preparing a Machine for Transport
Before Transporting
Before Transporting from Repair Center to Customer Site
Check Point Comment
Box Proper Side Up
Keep the box with the top up and bottom down. Do not tilt the box
more than 45 degrees from the horizontal.
Ink in Machine
The machine can be shipped with the ink cartridges installed in the
machine. However, once the ink cartridges are installed the
machine should be set up and used within 30 days. If the machine
is kept longer than 30 days, the machine needs to be cleaned with
the cleaning cartridges.
Machine Cover
Cover the machine with a plastic bag. This prevents spillage if the
ink cartridges leak.
New Ink Cartridges
New ink cartridges should always be provided with a repaired
machine.
J007/J010 C, M, Y, K: Medium-Size Cartridges
J011
C, K: Medium-Size Cartridges
M, Y: Large-Size Cartridges
Before Transporting from Customer Site to Repair Center
Check Point Comment
Box Proper Side Up
Keep the box with the top up and bottom down. Do not tilt the box
more than 45 degrees from the horizontal.
Ink Collection Tank
Check the ink collection tank to confirm that it is not leaking. Insert
a paper towel between the tank and cover to prevent leakage
To Next Page
Loading...
