Ricoh MP 9003 Series User Manual

Message Cause Solution
"Connection with the remote
machine has failed. There is
a problem with the remote
machine structure. Contact
the administrator."
The settings or machine
configurations for using the
remote fax function to
connect to the main machine
are incorrect.
For details about the settings and
machine configurations for using the
remote fax function to connect to a
main machine, contact your
administrator.
"Transfer error has occured.
Check the status of the
remote machine."
A network error occurred
during transfer.
• Check that the correct IP address
or host name is set for the main
machine in [System Settings]. For
details about these settings,
contact your administrator.
• Check that the main machine is
working correctly.
• Check that the LAN cable is
correctly connected to the
machine.
• For details about transmission,
contact your administrator.
"The HDD of the remote
machine is full."
The hard disk became full
after using the remote fax
function to scan an original.
Delete unnecessary files.
10. Troubleshooting
200

Ricoh MP 9003 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Standard Features	Print, Copy, Scan
Memory (RAM)	2 GB
Hard Disk Drive	320 GB
Copy Resolution	600 x 600 dpi
Print Speed	90 ppm
Paper Capacity	8, 300 sheets maximum
Paper Size	A3, A4, A5, B4, B5
Paper Weight	52 to 300 g/m²
Optional Features	Fax, Additional Paper Trays, Finisher Options
Power Source	AC 220-240V, 50/60Hz
Scan Resolution	600 x 600 dpi
Copy Speed	90 ppm
Fax Resolution	200 x 200 dpi
Network Connectivity	Ethernet