Message Cause Solution
"Error occurred while
processing an Unauthorized
Copy Prevention job. Job
cancelled."
In [Administrator Tools]
under [System Settings],
priority was specified to be
given to Unauthorized Copy
Prevention Printing set on this
machine.
Cancel Unauthorized Copy Prevention
Printing for the printer driver. For
details about how to cancel the
settings, see the printer driver Help.
"Collate Cancelled" Collate was canceled. Turn off the power, and then back on
again. If the message appears again,
contact your service representative.
"You reach the usage limit.
This job has been
cancelled."
The number of pages the
user is permitted to print has
been exceeded.
For details about print volume use
limitation, see "Managing Print Volume
per User", Security Guide.
"Exceeded the maximum
number of multi-sheet fold.
The job has been
cancelled."
The maximum number of
multi-sheet fold was
exceeded.
Specify fewer sheets for the multi-sheet
fold function.
For details about the maximum number
of multi-sheet fold, see "Fold", Print.
"Fold is not available with
the settings. The job has
been cancelled."
Fold function is not available
with the current settings.
Check the paper settings. For details
about the limitations of the Fold
function, see "Fold", Print.
"Receiving data failed." Data reception was aborted. Resend the data.
"Sending data failed." The machine received a
command to stop
transmission from the printer
driver.
Check if the computer is working
correctly.
"The selected paper size is
not supported. This job has
been cancelled."
Job reset is automatically
performed if the specified
paper size is incorrect.
Specify the correct paper size, and
then print the file again.
"The selected paper type is
not supported. This job has
been cancelled."
Job reset is automatically
performed if the specified
paper type is incorrect.
Specify the correct paper type, and
then print the file again.
Messages Displayed When You Use the Printer Function
205
To Next Page
Loading...
Need help?
General
