Ricoh MP 9003 Series User Manual

• The default period the machine waits before entering Low Power mode is 1 minute. This
default time can be changed.
Sleep mode
• If this machine remains idle for a specified period or when [Energy Saver] ( ) is pressed, it
enters Sleep mode to further reduce its electrical consumption.
• The default delay time the machine waits before entering Sleep mode is 1 minute. This default
time can be changed.
• The machine can print jobs from computers and receive faxes while in Sleep mode.
Specification
• (mainly Europe and Asia)
Type 1 Type 2 Type 3
Reduced electrical
consumption in Low
Power mode
*1
170 W 170 W 200 W
Time of switch into
Low Power mode
1 minute 1 minute 1 minute
Time of switch out
from Low Power
mode
*1
10 seconds 10 seconds 30 seconds
Reduced electrical
consumption in
Sleep mode
*1
0.9 W 0.9 W 0.9 W
Time of switch into
Sleep mode
1 minute 1 minute 15 minutes
Time of switch out
from Sleep mode
*1
20 seconds 20 seconds 300 seconds
Duplex Function
*2
Standard Standard Standard
*1
The time it takes to switch out from energy saving functions and electrical consumption may differ
depending on the conditions and environment of the machine.
*2
Achieves ENERGY STAR energy savings; product fully qualifies when packaged with (or used
with) a duplex tray and the duplex function is enabled as an option.
• (mainly North America)
11. Information for This Machine
240

Ricoh MP 9003 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Standard Features	Print, Copy, Scan
Memory (RAM)	2 GB
Hard Disk Drive	320 GB
Copy Resolution	600 x 600 dpi
Print Speed	90 ppm
Paper Capacity	8, 300 sheets maximum
Paper Size	A3, A4, A5, B4, B5
Paper Weight	52 to 300 g/m²
Optional Features	Fax, Additional Paper Trays, Finisher Options
Power Source	AC 220-240V, 50/60Hz
Scan Resolution	600 x 600 dpi
Copy Speed	90 ppm
Fax Resolution	200 x 200 dpi
Network Connectivity	Ethernet