Ricoh MP 9003 Series User Manual

Type 1 Type 2 Type 3
Reduced electrical
consumption in Low
Power mode
*1
170 W 170 W 200 W
Time of switch into Low
Power mode
1 minute 1 minute 1 minute
Time of switch out from
Low Power mode
*1
10 seconds 10 seconds 30 seconds
Reduced electrical
consumption in Sleep
mode
*1
0.8 W 0.8 W 0.8 W
Time of switch into
Sleep mode
1 minute 1 minute 15 minutes
Time of switch out from
Sleep mode
*1
20 seconds 20 seconds 300 seconds
Duplex Function
*2
Standard Standard Standard
*1
The time it takes to switch out from energy saving functions and electrical consumption may differ
depending on the conditions and environment of the machine.
*2
Achieves ENERGY STAR energy savings; product fully qualifies when packaged with (or used
with) a duplex tray and the duplex function is enabled as an option.
• Specifications can vary depending on which options are installed on the machine.
• For details about how to change the default interval, see "Timer Settings", Connecting the
Machine/ System Settings.
• The machine enters sleep mode directly in the following situations:
• Low Power Mode Timer and Sleep Mode Timer are set to the same time
• Sleep Mode Timer is set shorter than Low Power Mode Timer
• Depending on which embedded software application is installed on it, the machine might take
longer than indicated to enter Sleep mode.
Information on Environmental Regulations
241

Ricoh MP 9003 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Standard Features	Print, Copy, Scan
Memory (RAM)	2 GB
Hard Disk Drive	320 GB
Copy Resolution	600 x 600 dpi
Print Speed	90 ppm
Paper Capacity	8, 300 sheets maximum
Paper Size	A3, A4, A5, B4, B5
Paper Weight	52 to 300 g/m²
Optional Features	Fax, Additional Paper Trays, Finisher Options
Power Source	AC 220-240V, 50/60Hz
Scan Resolution	600 x 600 dpi
Copy Speed	90 ppm
Fax Resolution	200 x 200 dpi
Network Connectivity	Ethernet