Ricoh MP C401 Series User Manual

Message Causes Solutions
"You do not have a privilege
to use this function. This
operation has been
cancelled."
The logged in user does not
have the privileges to
register programs or change
the paper tray settings.
For details about how to set
permissions, see Security Guide.
When a user cannot be registered
Message Causes Solutions
"Auto-registration of user
information has failed."
Automatic registration of
information for LDAP
Authentication or Windows
Authentication failed
because the Address Book is
full.
For details about automatic registration
of user information, see Security
Guide.
"Information for user
authentication is already
registered for another user."
The user name for LDAP or
Integration Server
authentication was already
registered in a different
server with a different ID,
and a duplication of the user
name occurred due to a
switching of domains
(servers), and so on.
For details about user authentication,
see Security Guide.
When other errors occur
Message Causes Solutions
"98: Error" The machine could not
access the hard disk
correctly.
Turn off the power, and then back on
again. If the message appears
frequently, contact your service
representative.
Messages Displayed When You Use the Printer Function
187

Ricoh MP C401 Series Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Monthly Duty Cycle	Up to 150, 000 pages
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Processor	533 MHz
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	40 ppm (A4)
Connectivity	USB, Ethernet
Supported Paper Sizes	A3, A4, A5, B4, B5, Letter, Legal, Executive, Folio
Scanner Type	Flatbed, ADF
Scan Resolution	600 dpi
Copy Speed	40 cpm (A4)
Control Panel	color touchscreen
Memory	1.5 GB RAM