Ricoh Printer - Installing the Printer Driver Using Network

2
0
Installing the Printer Driver Using Network
1. Insert the provided CD-ROM into the CD-ROM drive.
If Auto Run starts, click Cancel, and then Exit.
2. Open the Printers and Faxes window or Printers window.
3. Click Add a printer.
This will start the Add Printer Wizard, and then click Next.
4. Click Local printer attached to this computer or Local printer, clear the
Automatically detect and install my Plug and Play printer check box,
and then click Next.
5. Click Create a new port, and then select Standard TCP/IP Port in "Type
of port".