3
E-Mail Default: Used to specify the default settings set by the administrator when
sending an e-mail from the product. The default settings mean the e-mail settings
will be reset to these values when the system auto reset time is over or when the
product turn off and on again.
Default E-mail Options
Item Description
Default
Subject
Enter text for the default email subject for all outgoing mails
sending from the product. Up to 64 characters are allowed.
Touch anywhere in “Subject” field to bring up the soft keyboard
to enter your subject.
Default File
Separation
Choose default maximum image size for attachment sent by the
product. The purpose to set file separation is to avoid the file
size limitation of SMTP servers. Use the combo box to select
from the list.
Choice: 1MB/3MB/5MB/10M/30MB/*Unlimited
Default Scan Options
Item Description
Original
Size
Choose your default document size.
Choice: *A4/Letter/A5/B5/Legal. Note: The Legal option
is only for ADF scan.
Resolution Choose your default resolution for the scanned document. The
higher the resolution, the greater details for the scanned image
yet it requires more disk space.
Choice: 75, 100, 150, *200, 300, 400, 600 dpi.
Image
Density
Adjust the image density in seven steps using the control panel.
And you can specify the default value of image density in the
range of 1 to 7 using the product’s Web Page. Increasing the
value makes your scanned image darker and decreasing the
value makes your scanned image lighter.
Choice: 1, 2, 3, *4, 5, 6, 7
Color File format for documents to be sent in colors via E-mail from
the product.
Choice:
1. File Format: *PDF, JPEG, TIFF, JPEG_EXIF, MTIF
(Multi-page TIFF)
Note: Choose MTIFF or PDF when you need to scan
multi-page document and convert it to a single image file.
2. Compression Level: *Low, Medium, High
(If TIF or MTIFF is selected as a file format, the compression
Level is defined as Raw only.)
To Next Page
Loading...
