43
Fax Settings: Used to specify more fax Settings.
Settings
Item Description
ID Number Enter the ID number of the product. Up to 32 characters can
be entered. Normally, you can enter your company name or
the fax number of your company in this field. Touch anywhere
on the “ID number” field to bring up the soft keyboard to type
your text. The text in this field as well as the station number
(telephone number of the product), the product’s clock including
date and time, the receiving fax number, and page index will be
printed at the top of all outgoing faxes as header information.
Station
Number
Enter the telephone number of the product. The Station
Number is the phone number of the line connected to the
built-in modem and the Station Number should be a value not
more than 20 characters. Some characters such as “+”, “ ”
(blank space) are supported. The value of the station number
will be printed as part of the fax header information of all
outgoing faxes.
Touch anywhere on the “Station Number” field to bring up the
soft keyboard to type your number.
Select Line Select to use the device’s fax telephone line as a direct outside
line (PSTN line) or as an extension (PABX line).
Choice: *Outside, Extension
PSTN Access
No.
Enter the number to access the PSTN (Pubic Switched Telephone
Network) line if your device’s fax telephone line is used as an
extension.
For example, enter 0 or 9 in the field via the soft keyboard.
Redial Sets the number of redial attempts if the number dialed is busy.
Choice: 0, 1, *2, 3, 4, 5, 6, 7, 8, 9, 10 (The Redial value 0
indicates no redial.)
Redial
Interval
The redial interval setting selects the number of minutes
between each redial if the number dialed is busy.
Choice: 1, 2, *3, 4, 5, 6 minutes.
Ring
Response
Lets you set the number of times the phone ring before the fax
answer.
Choice: *1 ring, 5, 10, 15, 20 seconds.
Sound
Volume
Use the arrow keys to adjust the sound volume during fax
communication.
Choice: 0, 1, 2, *3
*Factory Default
To Next Page
Loading...
