Ricoh Printer - Page 79

7
2
Settings Description
Basic
Item Description
Reduce/Enlarge: Select your scaling percentage by touching the
Switch button.
Choice: *100%, 25%, 50%, 78% (Legal ->
Letter), 93% (Fit to Page), 127% (Letter ->
Legal), 200%, Variable
Variable means selecting your scaling percentage in
one percent increment from 25%~400% by the
Up-arrow and Down-arrow key.
Paper Tray: Sets which paper tray will be used for current Copy
job.
Choice: *Auto (Select paper tray automatically),
Tray 1, Tray 2, MP(Multi-purpose) Tray
Please confirm if the paper size of the scanner’s LCD
has changed when you change the paper size of the
printer.
Paper Size: Sets your paper size.
Choice: Legal, A4, Letter, A5, B5. Note Legal
size is available on the ADF only.
Image Density Use “Density” control to adjust image density from
level 1 to level 7.
Choice: 1, 2, 3, *4, 5, 6, 7
Copy Mode: Choose the focus of your copy result. For example,
if your document contains many pictures, choose
Photo. If your document contains text only, choose
Text. Speed mode is a standard mode for all
documents.
Choice: *Speed, Text, Photo
Image Edit
Erase Border Sets the length of border you wish to cut.
Options: *0/0.25/0.5/0.75/1.0 inch or
*0/6/13/19/25 mm.
Margin
Adjustment
The “Margin Adjustment” option will move the copy
image to the right or/and to the bottom; depending
on “Right” and “Bottom” parameters.
Right or Bottom options: *0/0.25/0.5/0.75/1.0
inch or *0/6/13/19/25 mm.
Unit Choose the unit you wish to use.
Choice: *Inch, mm
* Factory Default