97: [Adjust Gate Fold Position 1]
Adjust the fold width of the bottom segment 1 (S1) of gate folded sheets when using the multi-folding
unit.
Press [+] to increase (S1) and [−] to reduce it.
The upper right illustration shows a partly opened, gate folded sheet, and the lower right illustration
shows a fully folded sheet.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
Setting Items Max. Value Min. Value Step Unit
[Adjust Gate Fold Position 1] 4.0 -4.0 0.2 mm
• You cannot specify this setting when using 12" × 18" paper.
98: [Adjust Gate Fold Position 2]
Adjust the fold width of the bottom segment 2 (S2) of gate folded sheets when using the multi-folding
unit.
Press [+] to increase (S2) and [−] to reduce it.
The upper right illustration shows a partly opened, double parallel-folded sheet (folded in half), and the
lower right illustration shows a fully folded sheet.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
4. Details of Menu Items in Advanced Settings
118
To Next Page
Loading...
