Setting Items Max. Value Min. Value Step Unit
[Adjust Gate Fold Position 2] 4.0 -4.0 0.2 mm
• You cannot specify this setting when using 12" × 18" paper.
99: [Adjust Gate Fold Position 3]
Adjust the fold position of the bottom segment 3 (S3) of gate folded sheets when using the multi-folding
unit.
Press [+] to increase (S3) and [−] to reduce it.
The upper right illustration shows a partly opened, double parallel-folded sheet (folded in half), and the
lower right illustration shows a fully folded sheet.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
To Next Page
Loading...
