Ricoh PRO C7200X - Page 136

1.SC Codes
132
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
from energy saving, and the door is closed)
 Harness disconnected
 Harness defective/shorted
 CRB-R defective
 IOB defective
1. Cycle the main power switch off/on.
2. Reconnect the harness between CRB-R and IOB.
3. Replace the harness between CRB-R and IOB.
4. Replace the CRB-R.
5. Replace the CIS.
6. Replace the IOB.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC681
Toner Bottle: RFID Unit Check Error
SC681-
01
D
No response
SC681-
02
D
Remote signal down
SC681-
03
D
Communication error
SC681-
04
D
Internal error
SC681-
05
D
Receipt buffer full
SC681-
06
D
No tag response (S)
SC681-
11
D
AFE error (S) : During reading/writing
SC681-
16
D
CRC error (S)
SC681-
21
D
Writing error (S)
SC681-
26
D
Erase error (S)
SC681-
31
D
Under voltage (S)
SC681-
D
Compare (CRC) error (S)