13. Press the [User Tools] key.
A confirmation message appears.
If you press [Yes], you will be automatically logged out.
• Under Windows Authentication, you can select whether or not to use secure sockets layer (SSL)
authentication.
• To automatically register user information under Windows authentication, we recommend that
communication between the machine and domain controller is encrypted by SSL.
• Under Windows Authentication, you do not have to create a server certificate unless you want to
automatically register user information.
• p.32 "Logging on Using Administrator Authentication"
• p.34 "Logging off Using Administrator Authentication"
• p.92 "Limiting Available Functions"
• p.40 "User Code Authentication"
Creating the Server Certificate
To create the server certificate for the domain controller, use the following procedure:
1. Start Internet Services Manager.
2. Right-click [Default Web Site], and then click [Properties].
3. On the “Directory Security” tab, click [Server Certificate].
Web Server Certificate Wizard starts.
4. Click [Next].
5. Select [Create a new certificate], and then click [Next].
6. Select [Prepare the request now, but send it later], and then click [Next].
7. Enter the required information according to the instructions given by Web Server Certificate
Wizard.
8. Check the specified data, which appears as “Request File Summary”, and then click [Next].
The server certificate is created.
Installing the Device Certificate (Certificate Issued by a Certificate Authority)
Install the device certificate using Web Image Monitor.
This section explains the use of a certificate issued by a certificate authority as the device certificate.
2. Authentication and its Application
54
To Next Page
