Ricoh Pro C901S - Page 259

Auto Reduce / Enlarge
• The machine selects reproduction ratios of between 25 400%.
Duplex
• You cannot use the following copy paper with this function:
• Paper smaller than A5, 5
1
/
2
× 8
1
/
2
• Label paper (adhesive labels)
• Cardstock
• Tab stock
• Envelope
• You can use the following copy paper with this function:
SRA3 , A3 , B4 , A4 , B5 , A5 , 12 × 18 , 11 × 17 ,
11 × 15 , 11 × 14 , 10 × 15 , 10 × 14 , 8
1
/
4
× 14 , 8 × 10 ,
8
1
/
2
× 14 , 8
1
/
2
× 11 , 5
1
/
2
× 8
1
/
2
, 8
1
/
2
× 13 , 8
1
/
4
× 13 ,
8 × 13 , 7
1
/
4
× 10
1
/
2
• When an odd number of originals are placed in the ADF, the back of the last page of copied
paper is blank.
• During copying, the image is shifted to allow for the binding margin.
Combine
• In this mode, the machine selects the reproduction ratio automatically. This reproduction ratio
depends on copy paper sizes and the number of originals.
• The reproduction ratios selectable by the machine are 25 400%.
• If the calculated ratio is under the minimum ratio, it is automatically adjusted to within available
range. However, with some ratios, parts of the image might not be copied.
• You cannot use custom size paper.
• If the orientation of originals is different from that of the copy paper, the machine will
automatically rotate the image by 90 degrees to make copies properly.
• If the number of originals placed is less than the number specified for combining, the last page
segment is left blank as shown.
BZH165
Supplementary Information
257
6