Ricoh Pro C901S - Page 260

Sort
• When using the Staple functions, the capacity may be reduced.
Stack
• Paper sizes and orientations that can be used with the Shift Stack are as follows:
SRA3 , A3 , B4 , A4 , B5 , A5 , 12 × 18 , 11 × 17 ,
11 × 15 , 11 × 14 , 10 × 15 , 10 × 14 , 8
1
/
4
× 14 , 8 × 10 ,
8
1
/
2
× 14 , 8
1
/
2
× 11 , 5
1
/
2
× 8
1
/
2
, 8
1
/
2
× 13 , 8
1
/
4
× 13 ,
8 × 13 , 7
1
/
4
× 10
1
/
2
Staple
• The following type of paper cannot be stapled:
• Envelope
• Label paper (adhesive labels)
• Curled paper
• Paper of low stiffness
• You can specify how the machine responds if its memory becomes full during copying, or if the
number of copies exceeds the capacity of the stapler:
• Divides the copies into the number of sheets that can be stapled
• Cancels the stapling job
• To specify Left 2, Top 2, or Slant together with 2 Originals or 8 Originals of Combine 1 Side,
or 4 Originals or 16 Originals of Combine 2 Sides: specify paper for orientation originals
and specify paper for orientation originals.
• To specify Left 2, Top 2, or Slant together with Double Copies: specify paper for orientation
originals and specify paper for orientation originals.
• Even if you place different size originals in the ADF, appropriate size of copy paper can be
automatically selected and stapled using the Mixed Sizes mode and Auto Paper Select function.
Load the paper you want to use in the paper trays beforehand. Paper sizes that can be stapled
when using the Mixed Sizes mode are as follows:
• A3 and A4
• B4 JIS and B5 JIS
• 11 × 17 and 8
1
/
2
× 11
• When stapling B4 JIS , 8
1
/
2
× 14 or larger paper sizes, be sure to extend the paper support
plate of the finisher tray.
• You cannot change stapling positions during copying.
• When the original image is rotated, the staple orientation changes by 90 degrees.
6. Appendix
258
6