Ricoh Pro C9200 Series - 0203 Line Width; Machine: Paper Feed; Output; 0301 Correct Output Paper Curl: 1 Sided: Face Up

CIP Training
Pro C9200 series
Adjustment Settings for Operators
CIP Training C7200 series
Adjustment Settings for Operators
0203 Line Width
Adjust the intensity of the laser for rasterizing the image data. Press [ + ] or [ - ] to
increase or decrease the intensity.
If you change the setting value, [Adjust Image Density] is automatically performed
before the machine starts printing.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Black
Cyan
Magenta
Yellow
0 5 -5 1 -
• Screen dots and hairline width become thicker when you
increase the intensity.
Machine: Paper Feed/ Output
0301 Correct Output Paper Curl: 1 Sided: Face Up
Specify the method for straightening paper curls on 1-sided face-up output sheets.
Select the method according to the direction and degree of curl.
Setting Items Selection Default Value
Tray 1
Tray 2
2-Tray LCIT: Tray 3
2-Tray LCIT: Tray 4
2-Tray LCIT: Tray 5
2-Tray LCIT: Tray 6
2-Tray LCIT: Tray 7
2-Tray LCIT: Tray 8
Bypass Tray
Extended Option Tray
Off
П Curl Correction
Level: Small
П Curl Correction
Level: Medium
П Curl Correction
Level: Large
U Curl Correction
Level: Small
U Curl Correction
Level: Medium
U Curl Correction
Level: Large
Off