Ricoh Pro C9200 Series - 0621 Set Number of Folds for Booklet; 0622 Paper Alignment for Booklet: With Feed

CIP Training
Pro C9200 series
Adjustment Settings for Operators
CIP Training C7200 series
Adjustment Settings for Operators
0621 Set Number of Folds for Booklet
Specify the number of booklet folds to be performed when using Booklet
Finisher SR5060. You can adjust the paper folding strength by changing
the number of folds per the booklet.
When you select "0", the default value, the finisher folds the booklet according to
the number of sheets in the booklet, as shown below.
• 1–13 sheets: 1 time
• 14–15 sheets: 2 times
• 16–25 sheets: 3 times
The value set here is added to the default values, which are 1, 2, and 3. Set a
negative value to reduce the number of times the finisher folds booklets. Set -1, -2,
or -3 to not fold booklets that have 1 to 13 sheets, 14 to 15 sheets, or 16 to 25 sheets,
respectively.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Setting 0 9 -
3 1 times
0622 Paper Alignment for Booklet: With Feed
Adjust the Tip Stopper movement when using the booklet binding function on
Finisher SR5050 or Booklet Finisher SR5060.
Use the function to reduce the dispersion of paper orientation in the feeding
direction due to paper size, thickness, curl and so on.
Press [ + ] or [ - ] to increase or decrease the amount of movement.