Ricoh Pro C9200 Series - 0614 Exit Guide Close Timing; 0615 Output Trail Edge Press Setting; 0616 Output Fan Setting

CIP Training
Pro C9200 series
Adjustment Settings for Operators
CIP Training C7200 series
Adjustment Settings for Operators
0614 Exit Guide Close Timing
Specify the timing to close the Paper Exit Guide when sheets are ejected and delivered to
the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060.
The machine opens and closes the Paper Exit Guide each time it ejects stapled sheets. If the
Paper Exit Guide does not open and close at a proper timing, bending may occur with the
stapled stack when stapled sheets fail to be properly ejected. Select the timing appropriate
for the paper you are using.
Setting Items Values Default Value
Setting Default
Thin Paper
Default
0615 Output Trail Edge Press Setting
Specify whether or not to hold the trailing edge of sheets when they are ejected and
delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060.
If too many sheets are delivered to the Shift Tray, the Ejected sheets may not be correctly
aligned due to the paper type and paper condition.
Setting it to [On] reduces the diversion of sheets.
Setting Items Values Default Value
Setting Auto
On
Off
Auto
0616 Output Fan Setting
Specify the fan operation to the sheets on the Shift Tray when sheets are ejected
and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060.
Blowing air peels off the sheets in close contact.
Setting Items Values Default Value
Setting Auto
On
Off
Auto