Ricoh Pro C9200 Series - 0612 Paper Alignment in Shift Tray: Across Feed; 0613 Output Tray Descending Position

CIP Training
Pro C9200 series
Adjustment Settings for Operators
CIP Training C7200 series
Adjustment Settings for Operators
0612 Paper Alignment in Shift Tray: Across Feed
Adjust the width of Paper Alignment Jogger
*1
on the Shift Tray when sheets are
ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060.
Use the function to reduce the dispersion of paper orientation at a right angle due to
paper size, thickness, curl and so on.
Press [ + ] or [ - ] to increase or decrease the width.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
A3 SEF
B4 JIS SEF
A4 LEF
A4 SEF
B5 JIS LEF
B5 JIS SEF
A5 LEF
A5 SEF
11 × 17 SEF
8
1
/
2
× 14 SEF
8
1
/
2
× 11 LEF
8
1
/
2
× 11 SEF
5
1
/
2
× 8
1
/
2
LEF
5
1
/
2
× 8
1
/
2
SEF
Other Paper Sizes
0.0 1.0 -
1.0 0.1 mm
*1 A guide for aligning output sheets when using the shift function. The guide is located inside the
finisher.
0613 Output Tray Descending Position
Specify the tray descent range according to the paper weight when sheets are
ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060.
The machine lowers the Paper Exit Guide each time it ejects stapled sheets. If the
descent range is not appropriate for the paper weight, it may cause the paper to be
improperly ejected or a diversion of sheets on the tray. Select the descent range
appropriate for the paper you are using.
Setting Items Values Default Value
Setting Paper Weight 1
Paper Weight 2
Paper Weight 3-8
Paper Weight 1