Ricoh Pro C9200 Series - 0624 Amount of Z-fold Skew Correction; 0625 Amount of Z-fold Skew Correction: Reverse; 0626 Maximum No. Stacked Sheets in Output Tray

CIP Training Pro C9200 series
Adjustment Settings for Operators
CIP Training C7200 series
Adjustment Settings for Operators
Setting Items Values Default Value
Set Off
On
On: Reverse
(Default)
On: Reverse (Default)
0624 Amount of Z-fold Skew Correction
Adjust the striking amount of paper during Z-folding skew correction. Use this function when Z-
folding skew correction causes a side effect.
The default striking amount "0.0" is set to 9 millimeters. Press [ - ] to reduce the striking
amount. The amount becomes 0 millimeter when the value is "-9.0".
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Set 0.0 0.0 -9.0 0.5 mm
0625 Amount of Z-fold Skew Correction: Reverse
Adjust the reverse rotation amount of Registration Roller during Z-folding skew correction.
Use this function when Z-folding skew correction causes a side effect.
The default reverse rotation amount "0.0" is set to 3 millimeters. Press [ - ] to reduce the reverse
rotation amount. The amount becomes "0" millimeter when the value is "-3.0".
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Set 0.0 0.0 -3.0 0.5 mm
0626 Maximum No. Stacked Sheets in Output Tray
Specify the number of sheets to stack on the Shift Tray at the time of shift sorting. To avoid
paper jams, specify the number according to the paper size.