Ricoh Pro C9200 Series - 0303 Correct Output Paper Curl: 2 Sided; 0304 Detect JAM099

CIP Training
Pro C9200 series
Adjustment Settings for Operators
CIP Training C7200 series
Adjustment Settings for Operators
0303 Correct Output Paper Curl: 2 Sided
Specify the method for straightening paper curls on 2-sided output sheets.
Select the method according to the direction and degree of curl.
Setting Items Selection Default Value
Tray 1
Tray 2
2-Tray LCIT: Tray 3
2-Tray LCIT: Tray 4
2-Tray LCIT: Tray 5
2-Tray LCIT: Tray 6
2-Tray LCIT: Tray 7
2-Tray LCIT: Tray 8
Bypass Tray
Extended Option Tray
Off
П Curl Correction
Level: Small
П Curl Correction
Level: Medium
П Curl Correction
Level: Large
U Curl Correction
Level: Small
U Curl Correction
Level: Medium
U Curl Correction
Level: Large
Off
0304 Detect JAM099
Specify whether or not to detect double feed (multi-sheet feeding).
If this is set to [On], the machine can detect double feeding, which prevents blank
sheets turning up in the delivered paper.
The machine may erroneously detect double feeding when using special paper
(double-layer paper, such as label paper). If such erroneous detection occurs, set this
to [Off].
This setting is invalid when you are printing from the tray for which custom paper is
allocated. For such paper, the value specified in [Detect JAM099] in [Advanced
Settings] takes precedence.
Setting Items Selection Default Value
Tray 1
Tray 2
2-Tray LCIT: Tray 3
2-Tray LCIT: Tray 4
2-Tray LCIT: Tray 5
2-Tray LCIT: Tray 6
2-Tray LCIT: Tray 7
2-Tray LCIT: Tray 8
Bypass Tray
Extended Option Tray
Off
On
On