Ricoh Pro C9200 Series - 0610 Amount of Punch Skew Correction; 0611 Paper Alignment in Shift Tray Setting

CIP Training
Pro C9200 series
Adjustment Settings for Operators
CIP Training C7200 series
Adjustment Settings for Operators
If jamming or ear-fold occurs at the punch section especially when thin paper is used, set it to [No].
Setting Items Values Default Value
Setting Off
On
On
0610 Amount of Punch Skew Correction
Adjust the level of skew correction when using Finisher SR5050 or Booklet Finisher SR5060.
Use the function to reduce the punch skewing caused by paper size, thickness, curl and so on.
To skew while punching, set [ + ] to increase the correction level.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
A4 LEF
B5 JIS LEF
A5 LEF
A5 SEF
8
1
/
2
× 11 LEF
5
1
/
2
× 8
1
/
2
LEF
5
1
/
2
× 8
1
/
2
SEF
Other Paper Sizes
0.0 1.0 -
1.0 0.5 mm
0611 Paper Alignment in Shift Tray Setting
Specify the alignment precision of output sheets during Shift Sorting when using Finisher
SR5050 or Booklet Finisher SR5060.
Use this function when the topmost sheet of the stacked paper is skewed.
Select [Accuracy Priority] to lower the shifting speed of the tray to reduce the skew caused by
inertia.
Setting Items Values Default Value
Setting Speed Priority
Accuracy Priority
Speed Priority